钢纤维混凝土弯拉强度(抗折强度)。
钢纤维混凝土用于公路路面、机场道面、或其它采用弯拉强度为设计指标的结构时,与钢纤维混凝土相应的集体混凝土的弯拉强度设计值的分级和使用范围,可按国家现行有关水泥混凝土路面、机场道面等行业设计规范的规定采用。
钢纤维混凝土弯拉强度设计值fftm=ftm(1+αtm?ρf?lf/df);
其中,fftm,ftm--钢纤维混凝土弯拉强度标准值,设计值;
αtm--钢纤维对钢纤维混凝土抗拉强度影响系数,宜通过试验确定;
ρf--钢纤维体积率(即钢纤维掺量体积率);
lf--钢纤维长度;
df--钢纤维直径或等效直径;
lf/df--钢纤维长径比。
钢纤维主要用于制造钢纤维混凝土,任何方法生产的钢纤维都能起到强化混凝土的作用。
纤维的增强效果主要取决于基体强度(fm),纤维的长径比(钢纤维长度l与直径d的比值,即I/d),纤维的体积率(钢纤维混凝土中钢纤维所占体积百分数),纤维与基体间的粘结强度(τ),以及纤维在基体中的分布和取向(η)的影响。当钢纤维混凝土破坏时,大都是纤维被拔出而不是被拉断,因此改善纤维与基体间的粘结强度是改善纤维增强效果的主要控制因素之一。
加入钢纤维的混凝土其抗压强度、拉伸强度、抗弯强度、冲击强度、韧性、冲击韧性等性能均得到较大提高。Steel fiber is mainly used in the manufacture of steel fiber concrete. Steel fiber produced by any method can strengthen concrete.
The reinforcement effect of the fiber mainly depends on the matrix strength (FM), the ratio of length to diameter of the fiber (the ratio of length of steel fiber to diameter D, I / D), the volume ratio of the fiber (the volume percentage of steel fiber in the steel fiber concrete), the bond strength between the fiber and the matrix (τ), and the influence of the distribution and orientation of the fiber in the matrix (η). When the steel fiber reinforced concrete is damaged, most of the fibers are pulled out rather than broken, so improving the bond strength between the fiber and the matrix is one of the main control factors to improve the fiber-reinforced effect.
The compressive strength, tensile strength, flexural strength, impact strength, toughness, impact toughness and other properties of the concrete with steel fiber are greatly improved.
纤维的增强效果主要取决于基体强度(fm),纤维的长径比(钢纤维长度l与直径d的比值,即I/d),纤维的体积率(钢纤维混凝土中钢纤维所占体积百分数),纤维与基体间的粘结强度(τ),以及纤维在基体中的分布和取向(η)的影响。当钢纤维混凝土破坏时,大都是纤维被拔出而不是被拉断,因此改善纤维与基体间的粘结强度是改善纤维增强效果的主要控制因素之一。
钢纤维主要用于制造钢纤维混凝土,任何方法生产的钢纤维都能起到强化混凝土的作用。
钢纤维混凝土弯拉强度设计值fftm=ftm(1+αtm?ρf?lf/df);
其中,fftm,ftm--钢纤维混凝土弯拉强度标准值,设计值;
αtm--钢纤维对钢纤维混凝土抗拉强度影响系数,宜通过试验确定;
ρf--钢纤维体积率(即钢纤维掺量体积率);
lf--钢纤维长度;
df--钢纤维直径或等效直径;
lf/df--钢纤维长径比。
钢纤维混凝土用于公路路面、机场道面、或其它采用弯拉强度为设计指标的结构时,与钢纤维混凝土相应的集体混凝土的弯拉强度设计值的分级和使用范围,可按国家现行有关水泥混凝土路面、机场道面等行业设计规范的规定采用。